4096 Channel DJ KTV Club Online control Artnet Ethernet SPI DMX Madrix Pixel led controller

Control IC Type

  • 2811/2801/2812/2812b/6803/3001/8806/9813
  • DMX512
  • 8 Ports of 512 Pixels Each

Specification

Product Feature

MR-A28D Artnet Controller is Based on The ArtNet Protocol of The Ethernet Network to Realize Communication Transmission and The Lighting Software Send it to The DMX512 Lamps in.
The Form of DMX512 Protocol Data. MR-A28D Artnet Madrix LED Controller Adopts High-Performance FPGA Processor, The Data is Efficient and Stable, it Follows The Standard ArtNet Protocol, Provides 2 RJ45 Network Interfaces, and Cooperates With Other Conventional Network Equipment to Realize Various Network Topologies.
MR-A28D Provides 8 Standard DMX512 Data Output Ports, Which Can Output a Total of 8 × 512 Data and Support Expansion Protocols. It Can be Used With Lighting Control.
Software Compatible With ArtNet Protocol, Such as Madrx3, Madrx5, Programmer, Pharos, Sunlite, Luminair, Arocos, MA console, Siquande, etc.; Widely Used in LED Dot Matrix and Stage Lighting Control Systems That Require a Lot of DMX512 Data, Often Used in TV Stations, Stage Performances, Night tours, Light and Shadow Shows, 3Dmapping Shows, and Other Places.

Feature Function: 
 
1. MR-A28D Supports ArtNet Protocol, Based on TCP/IP Ethernet Protocol;
2. MR-A28D Standard USITT DMX512/1990 General Protocol and Extended Protocol;
3. MR-A28D Device Supports Cascade Transmission of 254 Devices;
4. MR-A28D Supports 64 Universe and a Single Port Can be Expanded by 8 Times, That
is, 4096 Channels (Depending on Chip Performance);
5. The User Can Set up Two Different IP Addresses;

6. Support 32-65536 Grayscale 16Bit, Support 262144 Grayscale, Restore image Details;

7.Independent Brightness Control of 3 Primary Colors, Easy to Adjust White Balance;

8.Support R,RB,RGB,RGBW,RGBWY,and Multi-Color Mixing Control;

9.Accurate Gamma Correction Algorithm, in Line With Human Visual Sense;

10.Support 120Hz Frame Rate to Ensure High-definition Display and 3D Requirements;

11.Using Ethernet Interface and TCP/IP Protocol, The Distance is 100 Meters;

12.The LCD Display Module Displays the Controller Parameters and Status in Time;

13.Support The Device ID Number Data Flow Sequence and Fixed Arrangement;

14.Two RJ45 Ports, Support Mixed Cascading; Automatic Software Display Status;

15.A Variety of Chip Control is Integrated, and we Change the Control Chip Type, Clock Frequency, Duty Cycle, Gray Scale Level and Other Parameters Through Software Setting;

 

II. Support chip :

DMX512

Connection